Content Preview

CIP Level 1 Practical Exam 2025 Questions and Answers Station 1 (Environmental Conditions) Duties - ....ANSWER☑️☑️...-- Use sling psychrometer to measure wet and dry bulb temperature - Lookup in table (first using dry bulb) the relative humidity and dew point - Record surface temperature - Record if safe to coat (if difference is greater than 3 degrees celsius) Station 2 (Profile) Duties - ....ANSWER☑️☑️...-- Use the provided two-sided metal sheet for analysis - First, use the surface profile comparator and magnifying glass to read the closest profile reading of provided sheet (both sides) - Second, use Testex tape to take two readings of the surface (both sides) and record value using a spring-loaded micrometer. Stick tape to test. If value falls between 1.5-2.5 mils, use other tape and test again. - Third, zero the 224 Gauge using a piece of glass. - Forth, use the 224 Gauge (orange, surface profile gauge) to take 20 readings (10 each side) on both sides of the sheet (total 40 readings). - Take averages of Testex tape and 224 Gauge readings for each side of the sheet. Station 3 (Hi-Voltage) Duties - ....ANSWER☑️☑️...-- Know how to safely use a HiVoltage Holiday Detector. - Know Standard 0188. FOR STUDY PURPOSES ONLY ©️ 2025 ALL RIGHTS RESERVED 1